+
  • XDD-I.png

UV Sterilizer XDD-I


Model Number: XDD-I Product Name: UV Sterilizer Dimensions: 450mm*450mm*1630/2350mm Voltage: 220V/50 Hz Type: Health Care Product Application: Rehab Center/ Hospital/ Home After-sales Service: Onsite Training
GET PRICE

Production Introduction

Ultraviolet sterilizer (hereinafter referred to as sterilizer) is easy to install and use, occupies little space, and can radiate ultraviolet rays with a wavelength of 253.7nm, which can destroy the molecular structure in microbial body cells, causing growth cell death and/or regenerative cell death, with efficient and rapid disinfection and sterilization effect.

 

Product Structure
The UV sterilizer consists of a base, a stand, a lamp holder, a UV lamp, a remote control socket and a remote control (optional).

 

Scope of Application
UV sterilizers are suitable for disinfection of indoor air and surfaces under unmanned conditions in medical institutions, production workshops with hygiene requirements, public places and homes that need to be disinfected.

 

Main Bactericidal Factors and Their Strength
Main Germicidal Factor: ultraviolet, contains two UV lamps, the power of a single UV lamp is 40W.
UV Irradiation Intensity: 153μW/cm2 (single lamp).

 

Types of Microorganisms That Can Be Killed
Staphylococcus albicans, Staphylococcus aureus, Escherichia coli, Pseudomonas copper, Candida albicans, natural bacteria in the air.

 

Scope of Application and Method of Using
1. When using this product for indoor disinfection, place the equipment on a stable workbench, adjust the height and irradiation angle of the sterilizer, and ensure that ultraviolet rays can be directly irradiated within the range that needs to be disinfected.
2. The disinfection time should be guaranteed to be ≥ 30 minutes each time, and when the disinfection space ≥ 30m2, the disinfection time should be appropriately increased.
3. When the space that needs to be disinfected is too large, the number of sterilizers should be increased.
4. When using an ultraviolet sterilizer to disinfect rough surfaces such as paper and fabrics, the contact area should be appropriately increased, the irradiation time should be extended, and both sides should be irradiated. The distance between the disinfected items and the sterilizer should be 1m~1.5m, and the disinfection time should be ≥ 10min.
5. Make sure that no people, animals or plants are within the range of the UV sterilizer.
6. Click the "Switch" button of the controller or the "On" and "Off" buttons of the remote control to control the sterilizer.
7. When using the controller to control the equipment, it should not be in the direct range of the ultraviolet sterilizer, let alone look directly at the ultraviolet lamp.

Online Inquiry

* Note: Make sure you fill in the information accurately and keep it open. We will contact you as soon as possible.

Submit