Product Center
UV Sterilizer XDD-II
WhatsApp:
Ultraviolet Sterilizer (hereinafter referred to as sterilizer) is easy to install and use, occupies little space, and can radiate ultraviolet rays with a wavelength of 253.7nm, which can destroy the molecular structure in microbial cells, causing growth cell death and/or regenerative cell death, with efficient and rapid disinfection and sterilization effects.
Product Structure and Composition
The UV Sterilizer consists of a base, a shell, a control panel, a remote control, a lifting lamp holder, and a UV lamp.
Scope of Application
UV sterilizers are suitable for disinfection of indoor air and surfaces under unmanned conditions in medical institutions, production workshops with hygiene requirements, public places and homes that need to be disinfected.
Main Bactericidal Factors and Their Strength
Main germicidal factor: UV, contains two UV lamps, the power of a single UV lamp is 41W.
UV irradiation intensity is: 141μW/cm (single lamp)
Types of Microorganisms that Can Be Killed
Staphylococcus albicans, Staphylococcus aureus, Escherichia coli, Pseudomonas copper, Candida albicans, natural bacteria in the air.
Scope and Method of use
1. When using this product to disinfect indoors, place the device on a stable work surface and adjust the position of the sterilizer (as much as possible
can be close to the center), to ensure that the ultraviolet light can work normally and can be directly irradiated within the range that needs to be disinfected.
2. Each disinfection time should be guaranteed to be ≥ 30min, when the disinfection space ≥ 50m
2 hours, the disinfection time should be appropriately increased.
3. When the space that needs to be disinfected is too large, the number of sterilizers should be increased.
4. When using an ultraviolet sterilizer to disinfect paper, fabrics and other rough surfaces, the contact area should be appropriately increased and the irradiation time should be extended.
And both sides should be irradiated. The distance between the disinfected items and the sterilizer should be 1m~1.5m, and the disinfection time should be ≥ 10min.
5. Click the "On/Stop" button on the control panel or the "" key on the remote control to control the switch of the sterilizer.
6. Click "+", "-" on the control panel or "Timer +" and "Timer -" on the remote control to set the disinfection time.
The adjustment range is 5min~60min, and the step is 5min.
7. There is an infrared induction probe on the front of the sterilizer, and when it is active in the sensing area, the sterilizer will work with a delay of 10s±1s.
8. When using the controller to control the equipment, it should be out of the direct range of the UV sterilizer as soon as possible, and should not look directly at the UV lamp
Tube; When using the remote control to control the device, you need to leave the disinfection area before turning on the device.
Previous Page:
Next page:
Online Inquiry