Product Center
UV Sterilizer XDD-III
WhatsApp:
Ultraviolet Sterilizer (hereinafter referred to as sterilizer) is easy to install and use, occupies little space, and can radiate ultraviolet rays with wavelengths of 254nm and 222nm, which can destroy the molecular structure in microbial cells, causing growth cell death and/or regenerative cell death, with efficient and rapid disinfection and sterilization effects.
Product Structure and Composition
The UV Sterilizer consists of a base, a shell, a control panel, a remote control, and a UV lamp.
Scope of Application
UV Sterilizers are suitable for disinfection of indoor air and surfaces under unmanned conditions in medical institutions, production workshops with hygiene requirements, public places and homes that need to be disinfected.
Main Bactericidal Factors and Their Strength
1. Main germicidal factor: ultraviolet, including six ultraviolet lamps, the power of a single ultraviolet light is 15W and 30W respectively.
2. The ultraviolet irradiation intensity is (single lamp): 254nm type: 46μW/cm2 (every 1 meter); 222nm type: 48μW/cm2 (every 1 site).
Types of Microorganisms that Can Be Killed
Staphylococcus albicans, Staphylococcus aureus, Escherichia coli, Pseudomonas copper, Candida albicans, natural bacteria in the air.
Scope and Method of Use
1. When using this product for indoor disinfection, place the equipment on a stable workbench and adjust the position of the sterilizer (as close to the center as possible) to ensure that the ultraviolet rays can work normally and can be directly irradiated within the range that needs to be disinfected.
2. The disinfection time should be guaranteed to be ≥ 30 minutes each time, and when the disinfection space is ≥ 50m2, the disinfection time should be appropriately increased.
3. When the space that needs to be disinfected is too large, the number of sterilizers should be increased.
4. When using an ultraviolet sterilizer to disinfect rough surfaces such as paper and fabrics, the contact area should be appropriately increased, the irradiation time should be extended, and both sides should be irradiated. The distance between the disinfected items and the sterilizer should be 1m~1.5m, and the disinfection time should be ≥ 10min.
5. Click the "Start/Stop" button on the control panel or the "" key on the remote control to control the switch of the sterilizer.
6. Click on the control panel or on the remote control to set the disinfection time, the adjustment range is 5min~99min, step 5min; Click "" on the control panel or on the remote control to switch "Unattended mode" and "Health mode".
7. There is an infrared induction probe on the front of the sterilizer, in the unmanned mode, 2 minutes of no sensing person, it will start normally, when it is active in the induction area, the sterilizer stops working; In healthy mode, the sterilizer runs all the time.
8. When switching to "unmanned mode", after starting the sterilizer work, leave the disinfection space that can be irradiated by ultraviolet rays as soon as possible.
9. When switching to "health mode", there is no need for personnel to leave the disinfection space.
Previous Page:
Next page:
Online Inquiry